
Compressor 1 HP Electric
Use where needed in the operation of air tools. Portable unit, hand carry. Working pressure range from 95 to 125 PSI. CFM4.1. Electric cord supplied, no additonal cord to be used.

Compressor 5 HP Gas
Use where needed in the operation of air tools, sprinkler blowout, etc. Portable unit on wheels. Working pressure range from 95 to 125PSI. 11.4CFM @ 40PSI to 9.1CFM @ 125PSI. Machine weighs 175 lbs. Customer fills with unleaded gas.

Brad Nailer
Pneumatic brad nailer. Air compressor required for use. 1 HP electric compressor is sufficient for operation. 18 gauge, 90 degree brads. 1″, 1-1/4″, 1-1/2″ and 2″ fastener lengths. Operating pressure 70 to 120 PSI.

Finish Nailer
Pneumatic finish nailer. Air comrpessor required for use. 1HP electric compressor is sufficient for operation. 15 gauge, 33 degree, “DA” style nails. 1-1/2″, 2″, and 2-1/2″ fastener lengths. Operating pressure 70 to 120 PSI.

Flooring Nailer
Pneumatic flooring nailer. Makes for a quicker job. 2″ flooring cleat. Rents with actuator mallet. 1HP electric air compressor is sufficient for operation. Operating pressure 80 to 110 PSI.

Framing Nailer
Pneumatic framing nailer. Angled clipped head nails. 2-3/8″ or 3″ fastener lengths. 1HP air compressor is sufficient for operation. Operating pressure 80 to 110 PSI.

Roofing Nailer
Pneumatic roofing coil nailer. 11 gauge, coiled roofing nails. 1′, 1-1/4″, and 1-1/2″ fastener lengths. 1HP air compressor is sufficient for operqation. Operating pressure 70 to 120 PSI.

Pneumatic Stapler
Air powered fastener with contact actuation for a variety of wood working projects. 18 gauge, 1/4″ narrow crown using 1″, 1-1/4″, and 1-1/2″ lengths. Operating pressure 70 to 120 PSI.

Block Saw 14″
For use in cutting cement blocks, pavers, bricks, and segmental wall stones. Cutting depth of 4-1/2″. Electric, 12 gauge, 50 ft maximum length of extension cord to be used. Eye and ear protection needed. Has a 14″ diamond blade that is rented for an additional charge, or you can use your own 14″ blade.

Concrete Bull Float
Removing imperfections of wet or uncured concrete. Rents with multiple poles.

Concrete Cutoff Saw 14″
Use for cutting concrete walls and curbing. Cuts to a depth of 4-3/4″. Rents with 2 cycle mix gas can. Eye and ear protection needed. Has a 14″ diamond blade that is rented for an additional charge, or you can use your own 14″ blade.

Concrete Finishing Kit
Carrying bag with concrete finishing tools. Contains edger, groover, 16″ magnesium trowel, 24″ magnesium trowel, and 5″ X 36″ fresno float with handle extensions to 36′.

Concrete Mixer Wheel / Tilt Electric
Will mix up to 2 – 80 lbs bags or 3 – 60 ilbs bags. Has attachment to replace wheels with tilt stand. Electric, 12 gauge, 50 ft maximum length extension cord to be used.

Concrete Mixer Wheel / Tilt Gas
Will mix up to 2 – 80 lbs bags or 3 – 60 lbs bags. Has attachment to replace wheels with tilt stand. Gas powered. Customer refills with unleaded gas.

Concrete Tamper
Use to tamp concrete to settle rock and raise cement and water to surface. 7″ x 48″ waffle style tamper.

Jackhammer Electric
Use to break up concrete. Unit weighs 65 lbs. Rents with braking and chisel bits. Operates on standard 15 amp, 120 volt circuit. 50ft 12 gauge cord supplied. Unit is not to be used with any other extension cord, as it will damage motor. Eye and ear protection needed.

Paver Saw Wet w/ Stand
Water cooled paver saw on stand for making straigt and even cuts. Cuts standard pavers. Electric, 12 gauge, 50 ft maximum length of extesion cord to be used. Eye and ear protection needed. Has a 10″ diamond blade that is rented for an additional charge, or you can use your own 10″ blade.
Compactor Earth Rammer/Jumping Jack
Use for compacting backfilled trenches and compacting cohesive (clay like) soils. Unit weighs 154 lbs. Single person operation. Plate size 10” x 12”. Jumping Force 3000lbs and jumping height 1.7” – 2.2”. Customer refills with unleaded gas.

Compactor Medium Plate
Use for compacting soil and asphalt. Unit weighs 140 lbs. 13″ x 21″ plate size. Customer refills with unleaded gas.
Compactor Small Plate
Use for compacting small area. Unit weighs 55 lbs. 13″ x 18″ plate size with detachable rubber pad. Customer refills with unleaded gas.

Manual Post Digger
Clam shell digger. Remove soil for placing posts, stakes, etc

Post Hole Digger Handlebar 1-Man
A faster way to remove soil for placing posts, stakes, etc. Double handled unit. Rents with 2-1/2″, 6″, and 8″ augers. Digging depth of 3 ft. Customer refills with unleaded gas.

Post Hole Digger Hydraulic 2″ Ball
A faster way to remove soil for placing posts, stakes, etc. with minimum effort. Easily moved from one area to the next. Twos with 2″ ball. 36″ width. 45 mph maximum towing speed. No light hook up necessary. Rents with 6″, 8″, 12″, and 18″ augers. Digging depth 3 ft. Customer refills with unleaded gas.

Tamper Manual 10″ x 10″
Use for tamping soils, asphalt, etc. All metal head and handle.

Trencher 12″
Small operator propelled chain type trencher designed for installatrion of lines that require a narrow shallow trench. 5HP, carbide teeth. 3-3.5″ width and depths of 6″, 8″, or 12″. Unit weighs 230 lbs. Loads with ramps. Has ball hitch loader for vehicles with a canopy. Customer refills with unleaded gas.

Trencher 30″ w/ Trailer 2″ Ball
Hydraulic self propelled chain type trencher designed for the installation of lines that require a narrow trench. Used for irrigation and conduit lines. 13 Hp, carbide teeth. 4″ width with depths up to 30″. Unit weighs 900 lbs. 35″ WIDTH, 88″ length, 46″ height. Rents with trailer, light hook up required, 4-flat. Customer refills with unleaded gas.

Buffer / Polisher 13″
For cleaning, stripping, and polishing smaller area floors. Has fluid dispenser for applying cleaner or liquid polish. Comes with pad driver. Pads for buffing (white), polishing (blue), or scrubbing (red/black) are perchased separately.
Buffer / Sander 18″
For cleaning, stripping, and polishing large area floors. Can also be used for sanding. Sanding attachment available for an additional rental charge. Pads for buffing (white, polishing (blue), or scrubbing (red), sanding paper and screens are purchased separately.
Carpet Cleaner
4 Gallon cleaner/extractor. Fill with hot tap water. 10″ cleaning brush. Carpets should be vacuumed thoroughly before cleaning. Upholstery attachment avaiable at additional charge.
Carpet Knee Kicker
For stretching carpet using knee. Has adjustments for long or short carpets.
Carpet Power Stretcher
For use in stretching carpet. Manual stretcher with 5 – 34″ extensions for a total of 30′.
Carpet Seaming Iron
3″ X 10″ Plate. 135 to 425 degree temperature. 4 temp settings. Up to 4 minutes warm up time. Seaming tape sold separately.
Carpet Steam Roller
To cross weave carpet fibers to hide seams. 5″ seaming area.
Carpet Trimmer Wall Style
Alternative to using a carpet knife. Leaves a clean, uniform edge. Adjustable angle and cutting edge.

Dehumidifier
For removing excess moisture and humidity caused by broken or leaking pipes or appliances. Unit should be placed in unobstructed area. Discharge hose and electrical cord included.
Flooring Remover / Tile Scraper
Use to make the removing of floor tiles, linoleum, and adhesives much easier. Interchangeable blades for linoleum or tiles. Not recommended for ceramic tiles. Electric, 12 gauge, 50 ft maximum length extension cord to be used.
Laminate Flooring Cutter
Used for cutting laminate flooring up to 8 inch. Chopping style cutting motion. Non-electric.
Linoleum Roller 75 Lbs
Aids in smoothing newly installed linoleum. 15-3/4″ head. Clean any glue residue with acetone if needed.
Sander 12″ x 18″ Finishing Floor
12″ X 18″ orbital floor sander for fine finishing and between finish coat sanding. May be used to remove finish, but not as aggressive as a drum sander. Electric cord supplied, no extension cord to be used. 13 Amp, 1,725 RPM motor. 24, 36, 60, 80, and 100 grit sand paper, also 80, 120, and 150 grit sanding screens to be purchased separately. A buffer pad required for rental to avoid divots while sanding is purchased separately.
Sander 4-Disc Finishing Floor
4 disc orbital sander for fine finishing and between finish coat sanding. May be used to remove finish, but not as aggressive as drum sander. Electric cord supplied, no extension cord to be used. 110V 1.5 HP Motor. 85 Lbs. Use u-sander sanding discs only. 24, 36, 60, 100, and 120 grit sanding discs available and sold separately. Shop-Vac attachment on sander to cut down dust.
Sander Drum Floor
8″ drum sander used to remove finish from existing hardwood floors. Aggressive sander ment to take down floors to bare wood. Electric cord supplied, no extension cord to be used. 1 HP, 1,800 RPM motor. 24, 36, 60, and 100 grit belts purchased separately. Collection bag attached.
Sander Edger Floor
7″ disc edger sander with casters to provide stability and ease of use. Typically will follow the use of a drum sander. Electric cord supplied, no extension cord to be used. 15 AMP, 3,600 RPM motor. 24, 36, 60, and 700 grit screw on discs purchased separately. Swivel collection bag attached.
Turbo Dryer
Used for surface and subsurface drying of carpets, floors, and walls. Electric 12 gauge, 50 ft maximum length extension cord to be used. 2 speed. 19″ height, 17″ width, and 19″ length. Unit weighs 30 lbs.
Vacuum Wet Dry 12 Gallon
12 gallon capacity vacuum for wet and dry pickup. Rents with extension wand, 10’ suction hose, 12” combination floor tool, 14” squeegee, 5” upholstery tool, and 10” crevice tool. 25’ attached cord. Paper filter purchased separately. 27.5” height, 18” width, and 22” width. Unit weighs 38 lbs.
12 ft. Step Ladder
For individual use. 300 lb. load limit. Graduated step widths 12” to 30”. Standing height 9.5 ft.
12 ft. Orchard/Tripod 12ft
For individual use. Perfect for hard to reach heights where the area is somewhat restrictive. 300 lb. load limit. Graduated step widths 12” to 36” Standing height 9.5 ft.
20 ft. Fiberglass Extension
For use where extra height is required. 300 lb. load limit. Step width 13”. Working length 17 ft. Standing height 14 ft.
24 ft Fiberglass Extension
For use where extra height is required. 300 lb. load limit. Step width13” Working length 21 ft. Standing height 18 ft.
28 ft. Fiberglass Extension
For use where extra height is required. 300 lb. load limit. Step width13” Working length 21 ft. Standing height 18 ft.
40 ft Aluminum Extension
For use where extra height is required. 250 lb. load limit. Step width 13”. Working length 36 ft. Standing height 33 ft.
6 ft. Double Side Step
For use when project requires more than one set of hands. 300 lb. load limit. Step width 23”. Standing height 4 ft.
8 ft. Double Side Step
For use when project requires more than one set of hands. 300 lb. load limit. Step width 23”. Standing height 6 ft.
Articulated Ladder
Works well in uneven areas. Can be used as extension or step ladders. 3’ to 6’9” step ladder or 7’ to 15’ extension ladder. 300 lb. load limit. Graduated step widths 13” to 23”. Optional 8” x 12” platform for standing.
Ladder Jacks
For use with two ladders to support a platform between them to give increased working area. Double rung support. Will hold platform width up to 20”.
Aerator
For use in breaking up compacted soils and thatch below the surface. 19″ aerating width. 30 tines. Performs best when soil is moist, pulling a deeper plug. 48″ height, 30″ width, and 50″ length. Unit weighs 290 lbs. Loads with ramps. Customer refills unit with unleaded gas.
Blower Gas Backpack
Works well in larger applications. Backpack style with shoulder straps puts less stress on arms. Rented with 2-cycle mix gas can.
Brush Mower
Ideal for use in large brush and heavily weeded areas. 24″ heavy duty blade. Sled style deck. Will cut up to 1-1/2″ saplings. Will cut brush down to height of 3-1/2″. Customer refills unit with unleaded gas.
Chain Saw 20″ Gas w/ Safety Equipment
Make quick work of cutting. 20″ bar. Rents with helmet, chaps, bar and chain oil, and safety guide. Rents with 2 cycle mix gas can. If wanted, rents with back up chain for a non-refundable fee.
Chipper/Mulcher 4-1/2″ Capacity
For wood that is brown and not very green. Maximum 4-12” diameter. The Customer feeds wood into one shoot area with one branch at a time if over 1 in thick. Tows behind vehicle with 2” ball hitch. No trailer light hook ups. Customer refills with unleaded gas.
Chipper/Mulcher 5″ Capacity
For that is brown and not very green. Maximum 5” diameter. The customer feeds wood into a side shoot with any branches above the size of a pinky finger. Tows behind vehicle with 2” ball and trailer light hook up required. Customer refills with unleaded gas.
Edger Lawn Gas Powered
Quick way to give the lawn a clean and even edge. 9″ blade provided. Blade purchase optional. Adjustable depth. Customer refills with unleaded gas.
Electric Blower
Great for use in smaller applications. Hand held. Customer supplies extension cord. 16 gauge lawn and garden extension cord acceptable for use.
Fence Post Driver
One man fence post driver designed to eliminate strain. Weighted driver placed over head of post and worked in an up and down motion. 2-1/2” inside diameter. Unit weighs 17 lbs.
Fence Post Puller
Heady duty leverage tool for pulling steel studded posts and stakes of all kinds. Will pull post out straight from ground without bending.
Fertilizer Spreader
Hedge Trimmer 18″ Electric
More efficient way to trim shrubs and hedges. 18″ cutting blade. 16 gauge lawn and garden extension cord acceptable. Customer supplies WD-40 to lubricate cutting head during use.
Hedge Trimmer 22″ Gas
More efficient way to trim shrubs and hedges. 24″ cutting blade. Rents with 2 cycle mix gas can. Customer supplies WD-40 to lubricate cutting head during use.
Landscape Rake
For leveling and smoothing soils prior to seeding or sodding. 5-1/2 ft. handle. 42″ rake head.
Lawn Vacuum 5.5 HP
Aids in yard cleanup of leaves. Works best when yard waste is dry. 5-1/2HP motor. 26″ width. Customer refills with unleaded gas.
Log Splitter Horizontal / Vertical 2″ Belt
Makes quick work of splitting large wheels of timber, and further splitting cord wood. Will split horizontally or vertically. Spring loaded quick connect for easy conversion. Tows horizontally with 2″ ball. 51″ width. 45 MPH maximum towing speed. No light hook up necessary. Customer refills with unleaded gas.
Mower 20″ Push
Gas lawn mower. 20″ blade. Rear bagger. Customer refills with unleaded gas.
Overseeder / Cutter
Use for overseeding established yards and to rejuvenate lawns. 20″ cutting area approximately 2″ apart. Optional seeder use. Customer refills with unleaded gas.
Peat Moss Spreader
Use to evenly spread peat moss over large areas. Metal cage roller, 25″ width.
Power Rake
Use to remove dead grass and thatch above the soil. Best used when grass and soil is dry. 20″ raking width. Loads by hand with two individuals. Customer cleans and refills with unleaded gas.
Pruner Pole 6′ to 12″
Manual tree pruner fitted with lopper blade and 16″ saw blade. Lopper will cut up to 1-1/4″ diameter branches. Telescoping handle from 6′ to 12′.
Pruner Pole Extended Gas Powered
Gas powered tree pruner for sawing through larger diameter branches with 8” bar and chain. Handle will extend to 12′. Rents with 2 cycle mix gas can.
Pruner Pole Gas Powered
Gas powered tree pruner for sawing through larger diamter branches with 8″ bar and chain. Handle will reach to 6′. Rents with basket of saftey equipment, 2 cycle gas can, and bar and chain oil.
Roller – Lawn
For use when seeding or sodding new lawns. 26″ drum width, fills with water for weight.
Rototiller Large Rear Tine
Large size garden tiller for turning soil, working in amendments and breaking through sod. 20 1/2” tine width, 12” diameter. Will till to a depth of 16”. Loads with ramps. Customer refills with unleaded gas.
Rototiller Medium Rear Tine
Medium size garden tiller for turning soil, working in amendments and braking through sod. 22″ tine width, 11″ diameter. Will till to a depth of 14″. Two individuals can load by hand. Customer refills with unleaded gas.
Rototiller Mini / Cultivator Electric
Small cultivator perfect for raised beds and hard to reach areas. Lightweight, easyn to handle. Electric, 16 gauge, 50 ft maximum or 14 gauge, 100 ft maximum length extrension cord to be used. 8″ tine width. Will till to a depth of 10″.
Rotoriller Mini / Cultivator Gas
Small cultivator perfect for raised beds and hard to reach areas. Lightweight, easy to handle. 8″ tine width. Will till to a depth of 10″. Rents with 2 cycle mix gas can.
Rototiller Small Front Tine
Small size garden tiller for turning soil and working in amendments. 21″ tine width, 10″ diameter. Will till to a depth of 11″. Two individuals can load by hand. Customer refills with unleaded gas.
Sod Cutter
Quickly cut sod in strips for easy removal. 5.5HP. Unit weighs 360 lbs 24″ width, 36″ height, and 54″ length. Cutting width 18″, cutting depth 2-1/2″ maximum. Forward and reverse speeds. Loads with ramps. Customer refills with unleaded gas.
Spud Bar / Sanangelo Bar
Straight steel bar for digging and prying rocks, roots, etc. 1″ x 1″ x 72″ bar size, 17 lbs. Point end and chisel end.
Stump Grinder
Grinder to take tree stumps up to 24″ in diameter to approximately 6″ below the surface of the ground. 9 HP motor. Carbide tipped blade. Left wheel locks in position and pivots across stump. Loads with ramps. Customer fills with unleaded gas.
Trimmer Gas Powered String 4 Cycle
Trimming and edging made easier. 25cc engine. Handheld unit with straight shaft. Unit weighs 11.2 lbs. 4 cycle gas powered. Customer refills with unleaded gas.
Walk Behind String Trimmer
Airless Paint Sprayer
Sprays oil base and water base stains and paint. Not recommended for urethane based products. Pick up tube can be placed in gallon or 5 gallon containers. Minimum overspray. Minimum amount of paint or stain needed to spray is 3 gallons. Clean with water or thinner depending upon paint or stain used. Can be used with 18” or 6’ extensions. 50 ft. hose length.
Drywall Lift 11′ and 15′
For ease in placing panels on upper walls and ceilings.11’ standard lift and 15’ lift available. Will hold up to 12’ sheet. Unit breaks down into 5 parts for ease in loading.
Drywall Sander
Heat Gun
For use in removing paint, adhesives, etc. Use with burn-off scraper, may be purchased separately. Electric,16 gauge, 50 ft maximum length extension cord to be used, not included.
Ozone Generator
Used to eliminate odors or purify areas. Electric 16 gauge extension cord acceptable. Usage guide on generator. Do not remain in the area or return to the area until at least 20 minutes after turning off the generator.
Parking Lot Striper
Use to mark parking areas, etc. Use with marking or striping paint.
Pressure Washer 2700 PSI
High pressure washer excellent for cleaning siding, fencing and decks prior to painting or staining. Hook up to a water source with a standard garden hose. Has optional fluid injector when using detergents for cleaning. 15, 25, and 65 degree nozzles included with the machine. 0 degree rotating nozzle rents separately. Unit on wheels, loads by hand. Customer refills with unleaded gas.
Pressure Washer 3500 PSI
High pressure washer for use in cleaning. Not recommended for wood surfaces. Hook up to the water source with a standard garden hose. 0, 15, 25, and 65 degree nozzles are included with the machine. 0 degree rotating nozzle rents separately. Unit on wheels, loads by hand. Customer refills with unleaded gas.
Texture Gun
Hand held drywall hopper gun, sprays both texture and joint compound. 7 orifice sizes. Holds 1-3/4 lbs. Air valve on gun to adjust air flow.
Texture Sprayer with Compressor
Drywall texture hopper and compressor together in one unit. Eliminates holding additional weight of filled drywall hopper gun. Electric, 12 gauge, 50 ft. maximum length extension cord to be used. Joint compound recommended, approximately 2 to 3 quarts of water per 48 lb. box. 4 orifice sizes. Holds 6 gallons of mix. Delivers 4.5 CFM at 30 PSI. Air valve on gun to adjust air flow.
Tile Cutter 4″ Saw Hand Held
Versatile, hand held tile saw to cut a variety of materials. Electric, 12 gauge, 50 ft. maximum length extension cord to be used. 11,000 RPM, 8.75 amp motor. 4” continuous rim diamond blade. Adjustable base to change cutting depth and angle.
Tile Cutter 8″ Mitre Saw
Table top style miter saw for tile. Water cooled. Electric, 12 gauge, 50 ft. maximum length extension cord to be used. 8” continuous rim diamond blade. Unit weighs 53 lbs. Holds 2.2 quarts for 30 minutes cutting time. Cutting thickness, 1.8 inches at 90 degrees, 1 inch at 45 degrees. Cutting width 16 inches.
Tile Cutter Manual
Manual tile cutter score and snap type. Will straight cut up to a 12” tile.
Tile Saw 7-1/4″
Tile Saw w/ 10″ Tile Blade
Water cooled tile saw on stand for making straight and even cuts. Straight cuts up to 18”, and diagonal cuts up to 14”. Electric, 12 gauge, 50 ft. maximum length extension cord to be used. 10” continuous rim diamond blade. 96 lbs. 1-1/2” HP, 3460 RPM. Depth of cut 3-3/4”.
Tile Saw 20″
Tile Saw 24″
Wallpaper Steamer
Fast action removal of wallpaper and borders. 2 gallon steamer unit provides approximately 2 hours of steam. Large plate for wallpaper, and smaller plate for corners and borders are included in rental. Electric, 16 gauge, 50 ft. maximum length extension cord to be used.
Drill 1/2″ Magnum
1/2” drive. Forward/reverse variable speed. Detachable handle. Electric, 12 gauge, 50 ft. maximum length extension cord to be used, not included.
Drill Close Quarter
Unique 55 degree angle chuck for access into tight spaces where a conventional sized drill will not fit. 3/8” drive. Forward/reverse variable speed. Electric, 16 gauge electrical cord acceptable for use, not included.
Drill Cordless 18V
3/8” drive cordless drill. Forward/reverse high/low variable speed. Rents with additional battery pack and charger if needed.
Drill Cordless Impact Driver 18V
1/4” drive cordless drill. Forward/reverse high/low variable speed. Rents with additional battery pack and charger if needed.
Drill Right Angle
90 degree angle chuck drill reaches into awkward corners and difficult angles. 1/2” drive. Forward/reverse variable speed. Detachable handle. Electric,12 gauge, 50 ft. maximum length extension cord to be used, not included.
Driller Hammer 1/2″
Drywall Screw Gun
For a faster and more efficient way to attach drywall to framing. Equipped with bit and stop for uniform depth. Electric, 16 gauge extension cord acceptable, not included.
Grinder Angle 4-1/2″
Use for grinding or cutting metal or concrete in tight areas. Customer supplies masonry or metal blade. Electric, 12 gauge, 50 ft. maximum length extension cord to be used, not included. 8.5 Amp, 10,000 RPM motor. Eye and ear protection needed.
Nail Brad 18V Cordless
Pneumatic brad nailer. Air compressor required for use. 1 HP electric compressor is sufficient for operation. 18 gauge, 90 degree brads. 1”, 1-1/4”, 1-1/2” and 2” fastener lengths. Operating pressure 70 to 120 PSI.
Rotary Hammer Drill 1″ SDS
Use for drilling or chiseling concrete. Use when hole size to be drilled is 1/2” or less. Electric, 16 gauge, 50 ft. maximum length extension cord to be used. Customer purchase drill and/or chisel bits separately. Has hammer, drill, and hammer/drill settings. Eye and ear protection needed.
Rotary Hammer 1-1/2″ SDS
Bits that are available to rent with the machine: 1/2″ – 2″, Chiseling Flat and Point Bits, and Bullnose.
Roto Zip
Router
Plunge style router for making a variety of cuts, depending upon bits used. 11,000 – 22,000 rpm. Adjustable speed setting. Electric, 16 gauge, 50 ft. maximum length extension cord to be used. Customer purchases bit separately.
Sander Belt 3″ x 24″ Electric
Belt sander for quick sanding of wood and other materials, prior to finishing. Electric, 16 gauge, 50 ft. maximum length extension cord to be used. 690 – 1440 ft/min. Collection bag attached. Customer purchases belts separately.
Sander Jitterbug 1/4 Sheet
1/4 sandpaper sheet orbital palm sander, great as a finish sander in small applications. Electric, 16 gauge, 50 ft. maximum length extension cord to be used. 14,000 OPM. Collection bag attached. Customer purchases sandpaper separately.
Sander Random Orbit Palm 5″
Orbital sander duplicates natural hand sanding. Electric, 16 gauge, 50 ft. maximum length extension cord to be used. 5”-8 hole hook and loop discs used. 12,000 OPM. Collection bag attached. Customer purchases sanding discs separately.
Saw Circular 7-1/4″ Electric
Hand held 7-1/4” saw for cutting wood and other materials. Electric, 16 gauge, 50 ft. maximum length extension cord to be used. Tilting handle locks in one of 8 positions. Tilting shoe. 15 Amp, 3.25 HP 5800 RPM motor. 7-1/4” blade to be purchased separately.
Saw Compound Mitre 10″
Heavy duty saw for making straight, angled and beveled cuts. Electric, 12 gauge, 50 ft. maximum length extension cord to be used. Rents with 10” cutting blade. Customer responsible for purchasing alternate blades. 15 Amp, 4800 RPM motor. Miter stops at 0, 15, 22.5, 30, and 45 degree angles. Bevel capacity -3 to 50 degrees. Eye and ear protection needed.
Saw Jig / Sabre
Hand held scroll saw perfect for making curved cuts in a variety of materials. Electric, 16 gauge, 50 ft. maximum length extension cord to be used. Variable speed 0-3000 SPM. 4 adjustment levels. Adjustable shoe 45 degrees in each direction. T-shank blades to be purchased separately.
Saw Kickplate
Toe kick saw for removing under-layment under toe plates and making flush cuts to the wall. Electric, 16 gauge, 50 ft. maximum length extension cord to be used. Rents with carbide tipped blade. 10 Amp, 2-1/3 HP, 5000 RPM motor.
Saw Sawzall
Hand power saw used to a variety of items in a to and fro motion. Electric, 16 gauge, 50 ft. maximum length extension to be used. Variable speed control 0-2800 SPM. Adjustable pivot shoe. Sawzall blades to be purchased separately.
Saw Undercut
Jamb saw for cutting door jambs, baseboard, cabinet toe kicks, inside corners, and hanging doors. Electric, 16 gauge, 50 ft. maximum length extension cord to be used. Rents with carbide tipped blade. 8.15 Amp motor.
Screw Gun Cordless 18V Auto Load
3/8” drive cordless drill. Forward/reverse high/low variable speed. Rents with additional battery pack and charger if needed.
Screw Gun Deck/Drywall Standing Auto Load
Customer is able to screw drywall or wood decks together without the need of a ladder or bending over. The auto feed allows for constant screw driving without the need for holding the screw. Has depth adjustments and can drive between 1” – 3” screws. Comes with different driver heads for Phillips, Square, or Torx drive. Electric, 12 gauge, 50 ft. maximum length extension cord to be used, not included.
Stapler Electric
Electric stapler for quick fastening of carpet and uphostrly. Electric 14 gauge, 50 ft. maximum length extension cord to be used. 3/16” narrow crown staple, 3/8” and 9/16” lengths.
Stud Gun 27 Calibre Strip Load
Power hammer used for the fastening of studs to concrete walls and floors. .22 caliber single shot actuated tool. Heavy (green) maximum power load. 1”, 1-1/2”, and 2-1/2” pin capacity. Pins and load purchased separately
Stud Gun Low Velocity